ADDAX FLASH SUPPRESSOR 556 (AFS-556)

SPECS:

-4140 HEAT TREATED CHROME-MOLY STEEL

-OAL: APPROX 2.5" (MINUS CRUSH WASHER)

-MAG-PHOSPHATE FINISH

-1/2X28 (AR15 STANDARD THREAD)

-UNIQUE INTERNAL DESIGN CONES THE ESCAPING GASSES PUSHING OUT FORWARD REDUCING TURBULENCE, WHILE SUPPRESSING THE FLASH SIGNATURE VIA THE FLASH SUPPRESSOR CUT OUT'S.

-THE AFS-556 CAN BE INSTALLED ONTO A BARREL WITHOUT A CRUSH WASHER, AS LONG AS THE BASE OF THE FLASH SUPPRESSOR IS SITTING AGAINST THE BARREL SHOULDER WITHOUT ANY GAP AFTER BEING PROPERLY TIGHTENED DOWN.

-THE AFS-556 DOES NOT NEED TO BE INDEXED VERTICALLY OR HORIZONTALLY TO THE BARREL DUE TO DESIGN AND POSITION OF THE FLASH SUPPRESSOR SLOTS.

-CRUSH WASHER NOT INCLUDED

-MADE IN THE USA!